Connectors & Cable Assemblies

PV connectors are low-cost parts with high failure cost, so the spec differences that matter are easy to under-specify: voltage class (1000V vs 1500V), contact material, accepted cable cross-section and outer diameter, IP rating, and whether the project needs straight pairs, branch connectors, fused connectors or pre-assembled cable assemblies. "MC4-compatible" describes the shape, not the seal or the warranty.

Typical BOM scenarios: a string-wiring order pairs male and female connectors to the chosen cable size, in matched quantities per string. A combiner or array order adds Y-branch connectors sized to the string current and polarity layout. A pre-assembled order ships connectors already crimped onto cut cable lengths, which removes crimp-tool and quality risk on site but needs cable type, length and quantity defined in the RFQ.

OmniSol matches connectors to the cable and system already specified, flags cross-mating and sealing risk, and confirms crimp-tool needs and IP rating before quoting. Connectors consolidate naturally with cable and protection into one shipment. Send the connector type, cable size and quantity per string, and the line is quoted against the actual wiring design.