Australia Market
Solar Mounting Systems
for Australia
Klip-Lok seam clamps, tile hooks, and flat-roof ballast systems designed for Australian roof types and wind regions. AS/NZS 1170 engineering support included. ChAFTA duty reduction available.
Sourcing Solar Mounting for the Australian Market
Australia has one of the highest per-capita solar installation rates in the world, driven by strong irradiance, government incentives (STCs and LGCs), and an active residential and commercial rooftop sector. The market demands products that can handle Australia's unique combination of high UV, coastal salt air, and — in tropical and subtropical regions — cyclonic wind loads that far exceed European or North American requirements.
The dominant roofing material in Australian commercial and industrial construction is Klip-Lok standing seam steel, a non-penetrating profile that requires dedicated seam clamps rather than generic L-foot brackets. Getting this wrong means either penetrating the roof membrane (causing leaks and warranty voids) or using non-compliant clamps that fail under cyclone-category wind loads.
OmniSol supplies the OS-KL series specifically for Australian roofing profiles, tested to AS/NZS 1170.2 wind requirements and backed by engineering load calculations for every project.
AS/NZS 1170.2 Wind Regions
Australia's wind regions differ significantly from Europe or North America. Cyclone regions C and D require engineering certification that standard European or US mounting products cannot provide.
| Wind Region | Design Speed | OmniSol Capability |
|---|---|---|
| Region A | 45 m/s | Standard |
| Region B | 50 m/s | Standard |
| Region C | 60 m/s | Engineering cert required |
| Region D | 70 m/s | Full engineering sign-off |
* For cyclone regions C and D, OmniSol provides product-specific wind load calculations and can refer to Australian structural engineers for sign-off.
Australian Roof Types & Compatible Products
Australia has a distinct mix of roofing materials. The table below shows the dominant profiles and the OmniSol products that fit each.
Klip-Lok / Standing Seam Metal
Very common — commercial, industrial, new residential
OS-KL series seam clamps (non-penetrating)
OS-KL-01 to OS-KL-23
Colorbond Corrugated / Trimdek
Widespread residential and rural
Corrugated roof clamps + L-foot rail system
OS-CG series
Concrete / Terracotta Tile
Common residential — QLD, NSW, VIC, SA
OS-TH-01 (double-adjustable hook)
OS-TH-01
Flat Roof (TPO / membrane)
Commercial and industrial
Carbon steel ballast tray system
OS-BR series
Import Duty & Logistics
Xiamen → Australia port-to-port
ChAFTA Duty Reduction
- Standard MFN duty on aluminum structures (HS 7610.90): 5%
- Under ChAFTA (China-Australia FTA): typically 0%
- OmniSol provides Form E Certificate of Origin with every shipment
- Carbon steel products may have separate HS classification — confirm at quoting stage
Shipping Schedule
- Ports: Sydney (Botany Bay), Melbourne (Webb Dock), Brisbane, Fremantle
- Ocean transit: ~18–22 days from Xiamen
- FCL (40HQ) and LCL consolidation both available
- Incoterms: FOB Xiamen standard; CIF or DDP on request
- Mixed container: mounting + BOS + accessories in single shipment
Engineering Support for Australian Installers
Included at no extra cost with every project
Wind Zone Confirmation
We identify your AS/NZS 1170.2 wind region based on project postcode and advise the correct product selection and fixing pattern.
Load Calculation Report
Written wind and snow load calculation per AS/NZS 1170.1 & 1170.2, signed by our engineering team. Accepted by most local councils and certifiers.
CAD Layout & BOM
Custom roof layout in DXF or PDF format. Full bill of materials with SKU quantities for direct procurement.
CEC Approved Products Note
The Clean Energy Council Approved Products List covers solar modules and inverters — not mounting hardware. CEC-accredited installers are responsible for ensuring mounting systems comply with AS/NZS 1170 and the relevant state building code. OmniSol's engineering documentation is designed to satisfy this requirement and has been used on installations across QLD, NSW, VIC, WA, and SA.
Frequently Asked Questions
Does OmniSol supply Klip-Lok compatible solar mounting?
Yes. OmniSol's OS-KL series includes dedicated seam clamps for Klip-Lok 760, Klip-Lok 406, Lysaght Klip-Lok 700, Colorbond standing seam, and round bulb profiles. The library covers 50+ mold types. No drilling or roof penetration required.
Are OmniSol products compliant with AS/NZS 1170?
OmniSol provides wind and snow load calculations per AS/NZS 1170.1 and 1170.2 as part of the free engineering support package. For cyclone regions C and D (60–70 m/s), specific engineering documentation and product selection are required — OmniSol's team will identify the correct products for your wind region at the quoting stage.
Can I claim reduced import duty under ChAFTA?
Yes. Most solar mounting hardware qualifies for preferential import duty under the China-Australia Free Trade Agreement (ChAFTA). OmniSol provides a Form E Certificate of Origin with every shipment. Standard Australian MFN duty on aluminum structures (HS 7610.90) is 5%; under ChAFTA this is typically 0%.
What are typical lead times for solar mounting shipments to Australia?
Production lead time is typically 15–25 working days depending on order size and product complexity. Ocean freight from Xiamen to Sydney (Port Botany), Melbourne (Webb Dock), Brisbane, or Fremantle is approximately 18–22 days. Total door-to-port time from order confirmation is typically 6–8 weeks.
Do I need CEC-approved mounting systems for Australian grid-connected solar?
The Clean Energy Council (CEC) Approved Products List primarily covers modules and inverters. Mounting systems are not on the CEC list but must comply with AS/NZS 1170 structural requirements and the installer's accreditation obligations. OmniSol provides structural compliance documentation and load calculation reports to support CEC-accredited installers.
Technical Guides
Products & Systems
Markets & Services
Need project-specific engineering support?
Free CAD layout, wind/snow load calculations, and BOM — included with every order.
Get a Quote for Your Australian Project
Send us your postcode, roof type, and system size. We'll confirm the wind region, recommend the right products, and provide a landed-cost estimate within 24 hours.
Request AU Quote